Emblaser 2 Laser Cutter & Engraver

Revolutionary Laser Cutter and Engraver
All Emblaser 2 laser cutters comes with Air-Assist add-on for cleaner cutting and engraving on the base unit.

• All Emblaser 2 laser cutters come with 1x LightBurn software licence key
  • This licence key can be used concurrently on a maximum of 10 computers. Licence key can be activated and deactivated any time. To use on another computer outside of the first allocated 10, 1 of the 10 must give up the key to be used on the new computer. If you are purchasing as a school and wish to use LightBurn on more than 10 computers.
• All Emblaser 2 laser cutters or units marked with Rev.2 now enjoy 3 year warranty on their laser diode.
  

  
  

• Perfect for the classroom

  NOTE:
  For indoor class use without adequate ventilation from the supplied fume extraction conduit to external atmosphere.
  If NOT the OPTIONAL Fume Extraction cupboard (F2000 Fume Extractor) is required for healthy extraction of most dangerous fumes
  
  Designed, engineered and proudly made in Australia, the Emblaser 2 is the second generation desktop laser cutter and engraver that is a perfect combination of ease-of-use, size, power and price. Designed to be user friendly, easy to setup, safe and easy to use in any classroom.
  Fully manufactured in Australia and certified to Australian/NZ Standards AS/NZS IEC 608265.1:2014
  The Emblaser 2 has a Polycarbonate lid that is far stronger than Glass
  The lid exceeds fire ratings and structural drop tests
  The lid contains two interlocks that are independent to MCU and contain redundant circuitry
  The lid is specially formulated to block laser frequencies in the 400-700nm range, appropriate to this laser used in this machine
  The front right button cuts all power to the laser independent of MCU

  So many materials

  The Emblaser 2 can cut, mark or engrave cloth, cardboard, paper, leather, wood, plastics and so much more.
  Even with these limitations, the Emblaser 2 is a very powerful machine and as you can see, customers have made some impressive models.

  Material	Thickness	Engrave	Cut	Notes
  Fabric - Cotton	3mm	Y	Y
  Fabric - Felt	6mm	-	Y	All colours, except white.
  Leather - Vegetable Tanne	4mm	Y	*Y	*Treatment & colour dependant.
  Paper/Card - Corrugated Cardboard	6mm	Y	Y
  Paper/Card - Pasteboard	2mm	Y	Y
  Paper/Card - Plain Paper	3mm	Y	Y	Any colour.
  Plastic - Acrylic Black	3mm	Y	Y
  Plastic - Acrylic Green, Red Yellow	3mm	Y	Y
  Plastic - Acrylic Translucent (tinted)	3mm	Y	-
  Plastic - Acrylic Blue	3mm	-	-
  Plastic - Acrylic Clear & White	3mm	Y*	-	*Possible with coating.
  Plastic - Polypropylene	3mm	Y	Y	Air-Assist recommended.
  Wood - Poplar Plywood	6mm	Y	Y
  Wood - Balsa	10mm	Y	Y
  Wood - MDF	3mm	Y	Y
  Anodised Aluminium	-	Y	-
  Slate	-	Y	-
  Corkboard	3.0mm	Y	-	Air-Assist required.
  Rubber	2.0mm	Y	Y	Air-Assist recommended

  Most importantly, clear acrylic cannot be cut, however, you can cut opaque acrylic, limited to some colours.

  Q. Why can't the Emblaser 2 cut through clear Acrylic?

  A. The Emblaser 2 uses a laser diode and the frequency of light passes directly through clear Acrylic and glass. However, using black paint or coating, both glass and clear acrylic can be engraved, as the black coating absorbs the energy and this is transferred into the material. If you try cutting clear acrylic with paper on both sides, only the paper will be cut.

  Q. Can I cut Vinyl or Fake Leather with the Emblaser 2?

  A. No, PVC (Poly Vinyl Chloride)/vinyl/pleather/artificial leather Emits pure chlorine gas when cut and will also rust your machine!