UPBox+

UP Box + 3D Printer Specifications

Build size	255 mm width, 205 mm depth, 205 mm height
Build platform	Heated print bed with easy to remove platform
Smart Support	Intelligent Smart Support material, printed in the same material, printed at a lower density and built automatically by the included 3D print software
Selectable layer resolution	0.1 mm (100 micron), 0.15 mm 0.2 mm, 0.25 mm, 0.3 mm, 0.4 mm - That's a ultra fine HD detail of 100 microns!
Platform Levelling	Fully automatic levelling with integrated levelling probe - no human interaction required
Platform Height	Fully automatic height sensor - no human interaction required
Average noise	51.7 dB - as quiet as your fridge
Air filtration	Inbuilt HEPA filter - removes micro fine particles and 3d printing fumes
Lighting	Active heart beat mood lighting, provide visual feedback of the print status
Dimension	485 mm width, 520 mm depth, 495 mm height
Weight	20 kg
Shipping Weight	TBA kg
Power input	110-220VAC, 50-60Hz, 220W
Connectivity	USB (Print job stored and spooled to Printer, ability to turn off computer during printing.)
Consumables	1.75mm ABS Plastic Filament and PLA which is ideal for lost wax or investment casting
Warranty	12 month return to base
Software	STL 3D layout and printing software included free: Windows (XP,Vista,7,8) 32/64 bit and MAC OSX 10.7 Beta
Unboxing time to print	15 minutes

Terms and Conditions:

Errors and omissions excempted.Limit one per customer or while stocks last . Approximate delivery early 1st Quarter 2015. Before delivery we will notify you to request balance payment.

• Build platform: 255mm width, 205mm depth, 205mm height.
• Prints 30% faster than UP Series II
• 0.1 mm (100 micron), 0.15 mm 0.2 mm, 0.25 mm, 0.3 mm, 0.4 mm - That's a ultra fine HD detail of 100 microns!
• Raftless printing: Yes
• Support Material: Smart Supports. Intelligent snap off support material, printed in the same material, printed at a lower density and built automatically by the included 3D print software.
• Dimension: 485 mm width, 520 mm depth, 495 mm height
• Weight: 20kg
• Shipping Weight: TBA kg
• Power input: 110-220VAC, 50-60Hz, 220W
• Power output: 20 VDC 11amp
• Connectivity: Wireless / USB (Print job stored and spooled to Printer, ability to turn off computer during printing.)
• Consumables: 1.75mm ABS Plastic Filament and PLA which is ideal for lost wax or investment casting
• Warranty: 12 month return to base.
• Software: STL 3D layout and printing software included free for Windows and MAC 10.7 Beta
• Operating System: Windows XP, Vista, Windows 7, OSX 10.7 beta
• Unboxing time to print: 15 minutes